Loading ...
Loading ...
Loading ...
ADVANCED EMBROIDERY
119
3
k
The embroidery pattern is sent to the machine.
• If [Send to] is set to [Embroidering Screen], the
embroidery pattern sent to the machine will appear in
the embroidering screen. Refer to “Embroidering a
pattern received in the embroidering screen” on
page 119, and continue the operation with the
machine.
• If [Send to] is set to [Embroidering Settings Screen],
the embroidery pattern sent to the machine will
appear in the embroidering settings screen. Refer to
“Embroidering a pattern received in the embroidering
settings screen” on page 120, and continue the
operation with the machine.
■ Embroidering a pattern received in the
embroidering screen
If [Send to] is set to [Embroidering Screen], the embroidery
pattern sent to the machine will appear in the
embroidering screen.
a
After the embroidery pattern has been sent to the
machine, the embroidering screen appears.
The opened embroidery pattern appears in the
pattern display area with the icon for the Link
function.
b
To change the embroidering settings for the opened
embroidery pattern, touch . If the settings will
not be changed, continue with step
d.
• Touch when the following message appears.
Touch to return to the embroidering screen.
The embroidering settings screen appears.
c
After the desired settings have been specified, touch
to return to the embroidering screen.
d
Touch , and then press the “Start/Stop”
button to start embroidering.
When embroidering is finished, the following
message appears.
e
To open another pattern sent from the computer,
touch , and then repeat the procedure starting
from step
a to continue embroidering.
To stop embroidering or to embroider the same pattern
again, touch .
• USB cable connection • Wireless LAN connection
1 Icon for Link function
2 10-digit machine ID
3 Number of the pattern in
the queue
1 Icon for Link function
2 The machine’s name
3 Number of the pattern in
the queue
Memo
• While the machine is connected to the computer,
the machine’s status can be displayed by using a
function of the embroidery editing software. If
multiple machines are connected at the same time,
check the status of the machines using the 10-digit
machine ID or machine’s name that appears in the
machine’s screen. The following information can be
viewed from the computer.
- Machine’s status
- Information on the embroidery data being
embroidered and received by the machine (time
until the next time that the machine stops,
number of color changes, embroidering time,
maximum embroidery speed, pattern size, size of
frame being used on the machine)
2
1
3
2
1
3
• USB cable connection • Wireless LAN connection
Loading ...
Loading ...
Loading ...