Loading ...
Loading ...
Loading ...
BASIC EMBROIDERY
61
2
c
Touch a number button (between and ) to
select the number of the needle bar whose settings are
to be specified.
The needle bar number for the thread color selected
in step
b changes to the selected needle bar
number.
If the needle bar number was specified with reserved
needle bar settings, the color of the thread spool on
the left side changes to the specified thread color,
and the pattern in the pattern display area also
changes to the color of the specified needle bar.
1 Needle bar number specified with reserved needle bar
settings
2 Needle bar set to a different number (needle bar 2)
3 If a color is selected by touching this key, the machine
stops before embroidering the selected color.
4 If a color is selected by touching this key, the machine
does not embroider the selected color when
embroidering.
• 4 takes precedence if 3 and 4 are set at the same
time.
■ Initializing thread color settings
With the manual color sequence, the thread color
information on the machine can be initialized each time a
new pattern is selected, and then the needle bars can be
assigned. This allows the needle bar settings to be
specified without being affected by the thread color
information from the previous pattern.
Precautions on the manual color sequence
■ When embroidering a pattern containing seven
or more colors
With the manual color sequence, the machine does not
monitor the timing for replacing thread spools. Since the
machine does not automatically stop and no message
indicating that the thread spool be changed appears, as
with the normal needle bar settings, follow the procedure
below to set the machine to stop with thread spools that
must be changed.
•Step
c of “Using the manual color sequence” on
page 60
• “Stopping the machine at the next color change” on
page 105
• “Specifying pause locations before embroidering” on
page 105
Checking a preview image
Display the preview image to check that the embroidery will
be performed as desired.
a
Touch .
The preview image is displayed.
b
Touch or to display the desired type of frame,
and then select the embroidery frame.
• After determining the type of embroidery frame
holder and size of embroidery frame that are best for
your embroidery, change the embroidery frame
holder and embroidery frame that are installed. The
machine will automatically detect the embroidery
frame holder and embroidery frame and change the
display.
c
Touch to check the embroidering order.
The stitch simulator screen appears.
1 Select the simulation speed.
2 Operation keys
• Touch to return to the embroidery frame
holder/embroidery frame selection screen.
d
Touch to return to the previous screen.
2
3
4
1
PREVIEWING THE IMAGE
Memo
• A preview image in a landscape orientation cannot
be rotated to a portrait orientation, even if there is
space at the top and bottom.
1
2
Loading ...
Loading ...
Loading ...