Loading ...
Loading ...
Loading ...
ADVANCED EMBROIDERY
109
3
Changing the display guides
The guides in the pattern display area can be specified. The
machine automatically detects the type of embroidery frame
holder and embroidery frame that are installed and displays
them.
Touch .
The embroidery settings screen appears.
1 How the guides will appear with the specified settings
can be previewed here.
2 Displays the type of the embroidery frame holder.
3 Displays the size of the embroidery frame that is actually
installed. (page 68)
4 Select the type of the center point marker and the grid
lines and whether or not to display them.
■ Type of embroidery frame holder
The machine automatically detects the type of embroidery
frame holder that is installed.
If no embroidery frame holder is installed, the setting for
“Cap frame/Cylinder frame” is displayed.
* No icon appears since this frame is installed without
an embroidery frame holder.
Changing the thread color information
You can display the name of the thread colors, embroidery
thread number or the embroidering time.
When the machine is purchased, the thread color number
[#123] is selected.
a
Touch .
The embroidery settings screen appears.
b
Touch and to display the name of the thread
colors, the embroidery thread number or the
embroidering time.
c
When the thread number [#123] is displayed, touch
and to select from the embroidery thread
brand.
Specifying jump stitch trimming / “DST”
jump codes for trimming
You can select whether or not jump stitches are trimmed in
imported patterns. In addition, when using Tajima embroidery
data (.dst), you can select whether or not the thread is
trimmed according to a specified number of jump codes.
[ON]: The machine converts the “jump” code to a trim code,
based on the number specified in the settings screen.
[OFF]: The machine does not convert the “jump” code to a
trim code.
When the machine is purchased, [ON] is selected and the
number of jumps is set to [3].
Embroidery frame holder A (included)
Embroidery frame holder B (included)
Embroidery frame holder C (Optional)
Embroidery frame holder D (Optional)
Embroidery frame holder E (Optional)
Embroidery frame holder F (Optional)
Cap frame/Cylinder frame (Optional)
Magnetic sash frame (Optional)
*
1
4
3
2
Memo
• Colors on the screen may vary slightly from actual
spool colors.
• [Original], imported data retains the brand thread
created with the software, is set as a default.
Memo
• The thread brand setting will be applied with the
next pattern that is loaded.
Memo
• On the pattern editing screen, if the jump stitch trim
setting key is selected ( ), the jump stitches will
be trimmed even if [Thread Cut Initial Setting] is set
to [OFF]. For details, refer to “Trimming jump
stitches” on page 49.
Loading ...
Loading ...
Loading ...