Loading ...
Loading ...
Loading ...
WHEELS AND TYRES
585
4. Start the compressor by flicking the
switch to position I (On).
IMPORTANT
Risk of overheating. The compressor must
not run for more than 10 minutes.
5. Inflate the tyre to the pressure specified
on the tyre pressure label on the driver
side door pillar. Release air using the pres-
sure reducing valve if the tyre pressure is
too high.
6. Switch off the compressor. Detach the air
hose and the electrical cable.
7. Refit the dust cap on the tyre.
NOTE
•
After a tyre has been inflated, always
refit the dust cap in order to avoid dam-
age to the valve from gravel, dirt, etc.
•
Only use plastic dust caps. Metal dust
caps can rust and become difficult to
unscrew.
NOTE
The compressor is an electrical device. Fol-
low local regulations related to waste man-
agement.
Related information
•
Recommended tyre pressure (p. 566)
•
Using a puncture repair kit (p. 581)
•
Emergency puncture repair kit (p. 580)
Loading ...
Loading ...
Loading ...