Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR INSTRUMENT PANEL 87
Park / Headlight On Indicator Light
This indicator light will illuminate
when the park lights or headlights are
turned on.
Turn Signal Indicator Lights
When the left or right turn signal is acti-
vated, the turn signal indicator will flash
independently and the corresponding
exterior turn signal lamps will flash. Turn
signals can be activated when the multifunction
lever is moved down (left) or up (right).
NOTE:
A continuous chime will sound if the vehicle is
driven more than 1 mile (1.6 km) with either
turn signal on.
Check for an inoperative outside light bulb if
either indicator flashes at a rapid rate.
LaneSense Indicator Light — If Equipped
The LaneSense indicator light illumi-
nates solid green when both lane
markings have been detected and the
system is “armed” and ready to
provide visual and torque warnings if an unin-
tentional lane departure occurs.
Refer to “LaneSense — If Equipped" in “Starting
And Operating” for further information.
Stop / Start Active Indicator Light — If Equipped
This indicator light will illuminate
when the Stop/Start function is in
“Autostop” mode.
White Indicator Lights
LaneSense Indicator Light — If Equipped
When the LaneSense system is ON,
but not armed, the LaneSense indi-
cator light illuminates solid white. This
occurs when only left, right, or neither
lane line has been detected. If a single lane line
is detected, the system is ready to provide only
visual warnings if an unintentional lane depar-
ture occurs on the detected lane line.
Refer to “LaneSense — If Equipped" in “Starting
And Operating” for further information.
Light Sensor Failure
This light illuminates when there is
light sensor failure. If this light illumi-
nates, have an authorized dealer
inspect it.
Speed Warning Indicator Light — If Equipped
The indicator light will illuminate white
along with a notification text message
(Speed Warning Set to XX followed by
unit). When the set speed is exceeded,
a single chime will sound along with pop up
message of “Speed Warning Exceeded.” Speed
Warning can be turned on and off in the instru-
ment cluster display, for further information refer
to “Instrument Cluster Display Menu Items” in
“Getting To Know Your Instrument Panel.”
The number “55” is only an example of a speed
that can be set.
Blue Indicator Lights
High Beam Indicator Light
This indicator light will illuminate to
indicate that the high beam head-
lights are on. With the low beams acti-
vated, push the multifunction lever
forward (toward the front of the vehicle) to turn
on the high beams. Pull the multifunction lever
rearward (toward the rear of the vehicle) to turn
off the high beams. If the high beams are off,
pull the lever toward you for a temporary high
beam on, "flash to pass" scenario.
3
2020_FIAT_500X_OM_USA=GUID-B0E0CFCD-ED13-4DFD-975F-620984F05523=1=en=.book Page 87
Loading ...
Loading ...
Loading ...