Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY 205
3th Stop Lamp
The CHMSL is LED. For their replacement see
an authorized dealer.
Reversing Light & Rear Direction Indicators
1. Open liftgate
2. Using a suitable tool, undo the two inboard
screws, then release the light cluster from the
respective pin fasteners pulling it carefully.
Tail Light Access
3. Disconnect the connector, then undo the
two screws to access the bulbs.
4. Locate faulty bulb and press slightly and
turn at the same time: counterclockwise to
extract; clockwise to install.
5. Reposition the bulb holder assembly in the
headlight body, proceed until you hear the
tabs click.
6. Reinstall tail lamp assembly and close liftgate.
License Plate Lights
To replace the bulbs proceed as follows:
1. Using a suitable tool remove the license
plate lens.
License Plate Light Location
License Plate Light
2. Remove the bulbs from the individual side
contacts.
Lamp Assembly
1 — Tail Light Housing Inboard Screws
2 — Electrical Connector
3 — Bulb Holder Screws
1 — Bulb Holder
2 — Bulb
6
2020_FIAT_500X_OM_USA=GUID-B0E0CFCD-ED13-4DFD-975F-620984F05523=1=en=.book Page 205
Loading ...
Loading ...
Loading ...