Loading ...
Loading ...
Loading ...
174 STARTING AND OPERATING
Instrument Cluster Display
Park Assist is displayed on the instrument
cluster only if you have selected the item
"Sound And Display" inside the "Settings" menu
of the Uconnect system.
If an obstacle is detected in the center rear
region, the display will show a single solid arc in
the center rear region and will produce a
one-half second tone. As the vehicle moves
closer to the obstacle, the display will show the
single arc moving closer to the vehicle and the
sound tone will change from slow, to fast, to
continuous.
If an obstacle is detected in the left and/or right
rear region, the display will show a single
flashing arc in the left and/or right rear region
and will produce a fast sound tone. As the
vehicle moves closer to the obstacle, the
display will show the single arc moving closer to
the vehicle and the tone will change from fast to
continuous.
In general, the vehicle is closest to the obstacle
when the display shows only a flashing arc and
the chime becomes continuous.
The color on the display depends on the
distance and location of the obstacle.
Enabling And Disabling Park Assist
Park Assist can be enabled and disabled with
the Park Assist switch.
When the Park Assist switch is
pushed to disable the system, the
instrument cluster will display the
“PARK ASSIST OFF” message for
approximately five seconds. Refer to “Instru-
ment Cluster Display” in “Getting To Know Your
Instrument Panel” for further information.
The Park Assist switch LED will be on when Park
Assist is disabled or requires service. The Park
Assist switch LED will be off when the system is
enabled. If the Park Assist switch is pushed, and
requires service, the Park Assist switch LED will
blink momentarily, and then the LED will be on.
Park Assist will remember the previous state
when the ignition is placed in the OFF position,
and then placed back in ON/RUN.
Service The Rear Park Assist System
During vehicle start up, when the Rear Park
Assist System has detected a faulted condition,
the instrument cluster will actuate a single
chime, once per ignition cycle, and it will display
a dedicated message such as “PARK ASSIST
UNAVAILABLE WIPE REAR SENSORS” or the
“PARK ASSIST UNAVAILABLE SERVICE
REQUIRED” message. Refer to “Instrument
Cluster Display” in “Getting To Know Your
Instrument Panel” for further information.
When the gear selector is moved to REVERSE
and the system has detected a faulted condi-
tion, the instrument cluster display will display a
dedicated message such as "PARK ASSIST
UNAVAILABLE WIPE REAR SENSORS" or "PARK
ASSIST UNAVAILABLE SERVICE REQUIRED".
Under this condition, Rear Park Assist will not
operate.
If a message such as “PARK ASSIST UNAVAIL-
ABLE WIPE REAR SENSORS” appears in the
instrument cluster display, make sure the outer
surface and the underside of the rear fascia/
bumper is clean and clear of snow, ice, mud,
dirt or other obstructions, and then cycle the
ignition. If the message continues to appear,
see an authorized dealer.
CAUTION!
After turning OFF the ignition, the Rear Park
Assist remains in this setting until the next
ignition cycle, even in the case of changing
the setting of starting RUN to OFF and then
again in RUN.
2020_FIAT_500X_OM_USA=GUID-B0E0CFCD-ED13-4DFD-975F-620984F05523=1=en=.book Page 174
Loading ...
Loading ...
Loading ...