Loading ...
Loading ...
Loading ...
230 IN CASE OF EMERGENCY
Insert the wheel bolt wrench handle through the
eye and tighten, refer to “Jacking And Tire
Changing” in this section for further informa-
tion. The tow eye must be fully seated to the
attaching bracket through the lower front fascia
as shown. If the tow eye is not fully seated to the
attaching bracket, the vehicle should not be
towed.
Front Tow Eye Installation
Rear Tow Eye Installation
The rear tow eye receptacle is located behind a
access door on the rear bumper fascia.
To install the tow eye, open the access door
using the vehicle key or a small screwdriver, and
thread the tow eye into the receptacle.
Insert the wheel bolt wrench handle through the
eye and tighten, refer to “Jacking And Tire
Changing” in this section for further informa-
tion. The tow eye must be fully seated to the
attaching bracket through the lower rear fascia.
If the tow eye is not fully seated to the attaching
bracket, the vehicle should not be towed.
Rear Tow Eye Installation
ENHANCED ACCIDENT RESPONSE SYSTEM
(EARS)
This vehicle is equipped with an Enhanced Acci-
dent Response System.
Please refer to “Occupant Restraint Systems” in
“Safety” for further information on the
Enhanced Accident Response System (EARS)
function.
EVENT DATA RECORDER (EDR)
This vehicle is equipped with an Event Data
Recorder (EDR). The main purpose of an EDR is
to record data that will assist in understanding
how a vehicle’s systems performed under
certain crash or near crash-like situations, such
as an air bag deployment or hitting a road
obstacle.
Please refer to “Occupant Restraint Systems” in
“Safety” for further information on the Event
Data Recorder (EDR).
1 — Tow Eye
2 — Access Door
1 — Access Door
2 — Tow Eye
2020_FIAT_500X_OM_USA=GUID-B0E0CFCD-ED13-4DFD-975F-620984F05523=1=en=.book Page 230
Loading ...
Loading ...
Loading ...