Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 159
If the button is continually pushed, the set
speed will continue to increase until the button
is released, then the new set speed will be
established.
Metric Speed (km/h)
Pushing the SET (+) button once will result in a
1 km/h increase in set speed. Each subsequent
tap of the button results in an increase of 1 km/h.
If the button is continually pushed, the set
speed will continue to increase until the button
is released, then the new set speed will be
established.
To Decrease Speed
When the Speed Control is set, you can
decrease speed by pushing the SET (-) button.
The driver’s preferred units can be selected
through the instrument panel settings. Refer to
“Instrument Cluster Display” in “Getting To Know
Your Instrument Panel” for more information. The
speed increment shown is dependent on the
chosen speed unit of U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
Pushing the SET (-) button once will result in a
1 mph decrease in set speed. Each subsequent
tap of the button results in a decrease of 1 mph.
If the button is continually pushed, the set
speed will continue to decrease until the
button is released, then the new set speed will
be established.
Metric Speed (km/h)
Pushing the SET (-) button once will result in a
1 km/h decrease in set speed. Each subse-
quent tap of the button results in a decrease of
1 km/h.
If the button is continually pushed, the set
speed will continue to decrease until the
button is released, then the new set speed will
be established.
To Accelerate For Passing
Press the accelerator as you would normally.
When the pedal is released, the vehicle will
return to the set speed.
Using Speed Control On Hills
The transmission may downshift on hills to
maintain the vehicle set speed.
NOTE:
The Speed Control system maintains speed up
and down hills. A slight speed change on
moderate hills is normal.
On steep hills, a greater speed loss or gain may
occur so it may be preferable to drive without
Speed Control.
WARNING!
Speed Control can be dangerous where the
system cannot maintain a constant speed.
Your vehicle could go too fast for the
conditions, and you could lose control and
have an accident. Do not use Speed Control
in heavy traffic or on roads that are winding,
icy, snow-covered or slippery.
5
2020_FIAT_500X_OM_USA=GUID-B0E0CFCD-ED13-4DFD-975F-620984F05523=1=en=.book Page 159
Loading ...
Loading ...
Loading ...