Loading ...
Loading ...
Loading ...
62 GETTING TO KNOW YOUR VEHICLE
Power Sunroof Relearn Procedure
As a result of any abnormal behavior of the roof
or as a result of an emergency operation, and
you must relearn the automatic operation of the
sunroof.
Proceed as follows:
1. Push the open/close button to move the
roof in the fully closed position.
2. Place the ignition in the OFF position and
wait for at least 10 seconds.
3. Place the ignition in the ON/RUN position.
4. Pull the open/close button and hold it for
at least 10 seconds, after which you
should feel the mechanical stop of the
electric motor of the roof.
5. Within five seconds, pull to close and hold
the open/close button, the roof makes a
complete cycle of opening and closing
automatically (to indicate that the relearn
procedure has been successful). If this
does not happen and you need to repeat
the procedure from the beginning.
HOOD
Opening
The hood release lever (to open the primary
latch) and safety latch (to open the secondary
latch) must be released to open the hood.
1. Pull the hood release lever located under
the driver’s side of the instrument panel.
Hood Release Lever
2. Move to the outside of the vehicle.
3. Push the safety latch release lever toward
the passenger side of the vehicle. The
safety latch is located behind the center
front edge of the hood.
1 — Safety Latch Release Lever Location
4. Remove the support rod from the locking
tab and insert it into the seat located on
the underside of the hood.
Hood Prop System
1 — Locking Tab
2 — Support Rod
3 — Support Rod Seat
2020_FIAT_500X_OM_USA=GUID-B0E0CFCD-ED13-4DFD-975F-620984F05523=1=en=.book Page 62
Loading ...
Loading ...
Loading ...