Loading ...
Loading ...
Loading ...
78 GETTING TO KNOW YOUR INSTRUMENT PANEL
Lights
By selecting the item "Lights," you can make the
following adjustments:
Headlight Off Delay: Set the delay for headlight
shutoff after engine shutoff.
Headlight Sensitivity: Adjust the sensitivity of
headlight brightness.
Interior Ambient Lights: Increase of decrease
the brightness of the Interior Ambient Lights.
Greeting Lights: Enable/disable the vehicle’s
Greeting Lights.
Auto High Beam: Activate/deactivate the auto-
matic main beam headlights — If Equipped.
Daytime Lights: Activate/deactivate the
daytime running lights.
Cornering Lights: Activate/deactivate the
cornering lights — If Equipped.
Doors And Locks
By selecting the item "Doors & Locks," you can
make the following adjustments:
Auto Door Lock: Activate/deactivate the auto-
matic locking of the doors with the vehicle
moving.
Auto Unlock On Exit: Automatic unlocking of the
doors when exiting the vehicle.
Flash Light With Lock: Activate the direction
indicators when closing the doors.
Sound Horn With Lock: Activate/deactivate the
horn when pushing the lock button on the
Remote Keyless Entry. The options are "Off,"
"First Press,” and "Second Press."
Horn With Remote Start: Activate/deactivate
the horn at the Remote Starting of the engine
with the Remote Keyless Entry.
Remote Door Unlock Without Passive Entry:
Allows you to choose whether to unlock all the
doors or only the driver’s side door on the first
push of the unlock button on the Remote
Keyless Entry.
Door Unlock With Passive Entry: Allows you to
open the driver door only on the first push of
the unlock button on the Remote Keyless Entry
or using the passive entry handles on the doors
or liftgates.
Passive Entry — If Equipped: Activate the auto-
matic locking of the doors.
Engine OFF Procedure — If Equipped: Allows
you to turn off the engine from the instrument
cluster in the event of an ignition switch failure.
Instructions for turning off the engine via the
instrument cluster display controls will display
in the instrument cluster.
Stop/Start — If Equipped
Automatically stops the engine during a vehicle
stop under the right conditions to reduce fuel
consumption.
Push and release the up or down arrow button
until the Stop/Start menu title is displayed in
the instrument cluster. This menu shows
messages related to Stop/Start. Only one
message can be viewed at a time until the
condition is cleared.
When the Stop/Start is engaged (and the
engine is off), the associated hardware indi-
cator light is turned on. When the Stop/Start
button on the central stack is pushed, a Stop/
Start status message will appear in the instru-
ment cluster display.
2020_FIAT_500X_OM_USA=GUID-B0E0CFCD-ED13-4DFD-975F-620984F05523=1=en=.book Page 78
Loading ...
Loading ...
Loading ...