Loading ...
Loading ...
Loading ...
Error Message Cause Action
cartridge and drum unit assembly
back in the machine. If the problem
continues, replace the toner cartridge
with a new one.
Out of Memory
The machine's memory is full. If a fax-sending or copy operation
is in process
Do one of the following:
• Press or Quit, and wait until
the other operations that are in
progress finish, and then try again.
• Press Send Now to send the
pages scanned so far.
• Clear the data in the memory. To
gain extra memory, you can turn
off Memory Receive.
• Print the faxes that are in the
memory.
If a print operation is in process
Do one of the following:
• Reduce the Resolution.
• Clear faxes from the memory.
Print Data Full
The machine’s memory is full.
Press and delete the previously
stored secure print data.
Print Unable XX The machine has a mechanical
problem.
• Press and hold to turn off the
machine, wait a few minutes, and
then turn it on again.
• If the problem continues, contact
Brother Customer Service.
Contact Brother Customer Service
at:
1-877-BROTHER
(1-877-276-8437) (in USA)
www.brother.ca/support (in
Canada)
or to locate a Brother Authorized
Service Center, visit:
www.brother-usa.com/service
Replace Drum
It is time to replace the drum unit. Replace the drum unit.
The drum unit counter was not reset
when a new drum was installed.
Reset the drum unit counter.
Replace Toner
The toner cartridge is at the end of its
life. The machine stops all print
operations.
While memory is available, faxes are
stored in the memory.
Replace the toner cartridge with a
new one.
Scan Unable
The document is too long for 2‑sided
scanning.
Press . Use an appropriate size
paper for 2‑sided scanning.
Scan Unable XX The machine has a mechanical
problem.
• Press and hold to turn off the
machine, and then turn it on again.
• If the problem continues, contact
Brother Customer Service.
458
Loading ...
Loading ...
Loading ...