Loading ...
Loading ...
Loading ...
28
Source Selection
Rotate the INPUT Control to select the desired source
or press the INPUT Upp or Downq Push-button on
the Remote Control. Refer to figures 70 and 73.
Volume Control
Rotate the Front Panel VOLUME Control or use the
VOLume Upp or Downq Push-buttons on the Re-
mote Control for the desired listening level. Refer to
figures 70 and 73.
Trim Functions
The MAC7200 has various Trim Selections with Ad-
justments. The Trim Functions include Balance, Input
Trim Level, Tone Controls, Bass, Treble, Tuner Con-
Power On and Off
The Red LED above the STANDBY/ON Push-button
lights to indicate the MAC7200 is in Standby mode.
To switch ON the MAC7200, Press the STANDBY/
ON Push-button on the Front Panel or press the
(Power - Green) Push-button on the Remote Control.
The MAC7200 will go through a brief startup initial-
ization with the Front Panel Display indicating Power
Guard is active, last used source and volume setting.
This is followed by the volume setting indication
starting at zero and then increasing to the last used
volume setting. Refer to figures 70, 71, 72 and 73. To
switch OFF the MAC7200, press the STANDBY/ON
Push-button on the Front Panel or the (Power - Red)
Push-button on the Remote Control.
Note: For an explanation of the Remote Control
Push-button functions, refer to pages 16 and 17.
trol (when the Tuner FM or Tuner
AM is Selected), Phono Cartridge
MC Loading (when the Input is
Selected), Mono/Stereo, Meter
Backlight, Display Brightness and
HXD Mode (when Headphones
are connected). The Trim Settings
are stored in memory indepen-
dently for each Input Source
Selected, except the Meter Illumi-
nation and Digital Audio Display
settings of On or Off, which are
the same for all inputs.
Note: Selection and Adjustment of
all Trim Functions may be
performed by pressing the
Front Panel INPUT Trim
Control and then rotat-
ing it to select the desired
Trim Function. Then use the
VOLUME Adjust Control to
change the setting. Remote
Control TRIM Push-Button
together with the LEVEL UP/
Down Push-button may also
be used. Refer to figures 70
and 73.
After approximately 5 seconds
the Display returns to indicate
the Source Selection and Volume
Level.
BALANCE
Listening balance varies with dif-
ferent program sources, room acoustics and listening
positions relative to the Loudspeakers. Use the Bal-
ance (Trim Function) as needed to achieve approxi-
How to Operate the MAC7200
Figure 70
Figure 71
BAL 15%
Figure 72
COAX 1 30%
48kHz
Figure 73
USB 35%
DSD256
Loading ...
Loading ...
Loading ...