Loading ...
Loading ...
Loading ...
18
USB 35%
DSD256
IR Sensor receives
commands from a
Remote Control
STANDBY/ON Push-
button with indicator
switches the MAC7200
ON or OFF (Standby)
and resets the micropro-
cessors
MUTE Push-button
mutes the audio from
the Loudspeakers and
Headphones
Meter indicates the
Right Channel Output
of the amplifier
LED indicates when the Left
Channel Amplifier POWER
GUARD circuit activates
Meter indicates the
Left Channel Output
of the amplifier
LED indicates when the Right
Channel Amplifier POWER
GUARD circuit activates
OUTPUT 1 and 2 Push-buttons
with indicators, switch Pream-
plifier Output (Loudspeakers) 1
and 2 On or Off
INFORMATION DISPLAY indicates
the Sources, Volume, other Audio Set-
tings, Tuner Functions, other Operation-
al Functions and Setup Mode Settings
TONE Push-button with indicator,
when deactivated the audio signal
bypasses the Tone Settings
VOLUME Control allows ad-
justment of the listening level
for both channels. Also used
to change the various TRIM
and SETUP Functions
Connection for low
impedance dynamic
headphones, for
private listening
INPUT Control used to
select a source for listening
and recording. The control is
also used to enter the TRIM
or SETUP Modes and select
the various functions
Front Panel Displays, Controls, Push-buttons and Jack
TUNE tunes in radio stations
and is also used for various
Tuner Functions
PRESET Control selects
Presets for listening or
storing the desired radio
station
Loading ...
Loading ...
Loading ...