Loading ...
Loading ...
Loading ...
25
Power Mode
The MAC7200 incorporates an Auto Off Feature,
which automatically places the preamplifier into
the Power Saving Standby/Off Mode. This occurs
approximately 30 minutes after there has been an ab-
sence of user activity (includes changes to any of the
Operation Functions such as source selection, volume
adjustment, etc.) or absence of an audio signal. If it is
desirable to disable the Auto Off Feature perform the
following steps:
1. Press and hold in the INPUT Control to enter the
SETUP MODE. Refer to figure 2 on page 17.
2. Rotate the INPUT Control until “SETUP: Auto
Off, Enabled” appears on the Information Display.
Refer to figure 46.
3. Rotate the VOLUME (ADJUST) Control to select
Disabled. Refer to figure 47.
4. Press the INPUT Control to exit the Setup Mode.
Figure 46
SETUP: Auto Off
Enabled
Figure 47
SETUP: Auto Off
Disabled
Tuner Presets
Setup, con’t
The MAC7200 AM/FM Tuner Setup Mode allows for
adding and deleting Radio Station Presets. For de-
tailed information about the MAC7200 Tuner Opera-
tion, including the easier way of entering and removal
of Radio Station Presets refer to “How to Operation”
the Tuner Functions on pages 33 and 34.
ENTERING PRESETS:
Follow the steps below for entering a Radio Station
into Preset Memory for quick recall:
1. Press and hold in the INPUT Control to enter the
SETUP MODE. Refer to figure 2 on page 17.
2. Rotate the INPUT Control until “SETUP: Tuner
Presets, (Hold INPUT)” appears on the Informa-
tion Display. Refer to figure 48.
3. Press and hold in the INPUT Control until “FM
Presets Set, (Hold INPUT)” appears on the Infor-
mation Display. Refer to figure 49.
Note: To enter AM Presets instead of FM Presets,
rotate the INPUT Control unitl the Informa-
tion Display indicates “AM Presets Set, (Hold
INPUT). then continue with step 4.
4. Press and hold in the INPUT Control until “P1 =
Open, (Hold INPUT to SAVE)” appears on the
Information Display. Refer to figure 50.
SETUP: Tuner Presets
(Hold INPUT)
Figure 48
Figure 49
FM Presets Set
(Hold INPUT)
Note: If Presets were previously entered, the fre-
quency of the station will appear in place of
the word “Open”.
5. Rotate the Front Panel TUNING knob to choose
the radio station to be entered as P1 (Preset Num-
ber 1). Refer to figure 51.
6. To save FM Station 89.3Mhz as P1 Press and Hold
in the Input Control. Refer to figure 52.
7. To enter additional Radio Station Presets, first
rotate the PRESET Control until another Preset
(P2 thru P20) with the word “Open” appears. Then
using the TUNING knob find the next station to be
entered as a Preset.
DELETING PRESETS:
Follow the steps below for deleting all the previously
entered a Radio Station Presets from Memory:
1. Press and hold in the INPUT Control to enter the
SETUP MODE. Refer to figure 2 on page 17.
2. Rotate the INPUT Control until “SETUP: Tuner
Presets, (Hold INPUT)” appears on the Informa-
tion Display. Refer to figure 53 on the next page.
P1 = 89.3 MHz
(Hold INPUT to SAVE)
Figure 51
Figure 52
P1 = 89.3 MHz
PRESET SAVED
P1 = Open
(Hold INPUT to SAVE)
Figure 50
Loading ...
Loading ...
Loading ...