Loading ...
Loading ...
Loading ...
21
17. Rotate the INPUT Control until the character “L”
is flashing, then rotate the VOLUME (ADJUST)
Control to change the character “L” to “D”. Refer
to figure 13.
18. Rotate the INPUT Control until the “_” empty
space to the right of character D is flashing, then
rotate the VOLUME (ADJUST) Control to change
the “_” empty space to character to “I”. Refer to
figure 14.
19. Rotate the INPUT Control until the “_” empty
space to the right of character I is flashing, then
rotate the VOLUME (ADJUST) Control to change
the “_” empty space to character to “A”. Refer to
figure 15.
20. Repeat step 19 until the new name of “ RENAME:
BAL, MEDIA SVR” is indicated on the Front
Panel Display. Refer to figures 16 thru 18.
Figure 13
RENAME: BAL
>MED <
Figure 14
RENAME: BAL
>MEDI <
The Output Settings provide the ability to change how
the MAC7200 Output 1, Output 2 and Headphones
function.
OUTPUT 1 and 2:
By default OUTPUT 1 and 2 are set to go On/Off by
using the Front Panel OUTPUT 1 and 2 Push-buttons
or by using the OUTPUT 1 and 2 Push-buttons on the
Remote Control. If it is desirable to have OUTPUT 1
and/or 2 always On regardless of the OUTPUT 1 and
2 Push-button settings, perform the following:
1. Press and hold in the INPUT Control to enter the
SETUP MODE. Refer to figure 2 on page 19.
2. Rotate the INPUT Control until “SETUP: Out-
puts, (Hold INPUT)” appears on the Information
Display. Refer to figure 20.
3. Press and hold in the INPUT Control until
21. To save the new name, press and hold in the IN-
PUT Control until “SETUP: MEDIA SVR , ON /
Rename” appears on the Front Panel Information
Display. Refer to figure 19.
22. Exit the SETUP Mode by several presses of the
INPUT Control.
Note: For convenience, an “Input Assignment Chart”
on a separate sheet “Mc5A/5B” has been pro-
vided to keep track of changes.
Setup, con’t
Figure 15
RENAME: BAL
>MEDIA <
Figure 19
SETUP: MEDIA SVR
On / Rename
Output Settings
Figure 20
SETUP: Outputs
(Hold INPUT)
Figure 22
SETUP: OUTPUT 1
Unswitched
Figure 21
SETUP: OUTPUT 1
Switched
Figure 24
SETUP: OUTPUT 2
Unswitched
Figure 23
SETUP: OUTPUT 2
Switched
Figure 17
RENAME: BAL
>MEDIA SV <
Figure 18
RENAME: BAL
>MEDIA SVR <
Figure 16
RENAME: BAL
>MEDIA S <
“SETUP: OUTPUT 1, Switched” appears on the
Display. Refer to figure 21.
4. Rotate the VOLUME (ADJUST) Control to change
from the “Switched” setting to “Unswitched”.
Refer to figure 22.
5. In a similar manner, perform steps 3 and 4 to
change the OUTPUT 2 setting. Refer to figures 23
and 24.
The MAC7200 Default Setting for using Headphones
is to automatically mute all the Output Connectors
when the Headphone Cable Plug is inserted into the
MAC7200 Front Panel HEADPHONES Jack. There
are two available settings:
Mute All Outputs
Mute No Outputs
6. Rotate the INPUT Control until “SETUP: HEAD-
Loading ...
Loading ...
Loading ...