McIntosh MAC7200 User Manual

Loading ...

How to use the HR085 Remote Control

How to use the Remote Control

The supplied MAC7200 Remote Control (HR085) is

capable of directly controlling the functions of con-

temporary McIntosh Source Components connected to

the MAC7200 via the Data Ports.

Notes: 1. If at any time the MAC7200 seems unrespon-

sive to the HR085 Remote Control Commands,

press the DEVICE Push-button to select

first.

2. For additional information on using the

HR085 Remote Control with the McIntosh

Model, please refer to the “How to Operate”

starting on page 28.

3. For additional information on assigning the

Data Ports, refer to “Data Ports” on page 23.

Trim

Press the TRIM Push-button until the desired Trim

function (Balance, Trim Level, etc.) appears on the

MAC7200 Front Panel Display, then press the LEVEL

Up or Down Push-button to adjust the Trim setting.

Note: Press the TRIM Push-button to recall the last Trim

function selected. For additional information on

using the Trim Functions refer to “How to Oper-

ate” page 28.

Output Selection

Press the BLUE (Setup) Push-button followed by

the AM (Output 1) or FM (Output 2) Push-button, to

control the Rear Panel Audio OUTPUTS 1, 2 (ON or

OFF) and Power Control TRIG 1 / TRIG 2.

Note: For additional information on assigning the Out-

puts (1 and 2) and Power Control Triggers (1 and

2) refer to page 22.

Tuner Push-buttons

Press the AM or FM Push-button to select the desired

broadcast band. Press and release the Seek Up : the

band or Seek Down 9 the band Push-button to seek

the next available station. Press and hold a Directional

Up p or Down q Push-button to tune continuously

from station to station.

Loading ...

McIntosh MAC7200 Receiver