Loading ...
Loading ...
Loading ...
ENGLISH
6
TroubleshootingInformationHDMI Control FunctionPlaybackSetupConnectionsGetting Started Specications
About Media
Cautions on Using Media
Inserting a Disc
• Set the disc in the tray label side up.
• Make sure the disc tray is fully open when inserting the disc.
• Place the disc horizontally in the tray, aligned with the tray guide.
NOTE
• Only load one disc at a time. Loading two or more discs can damage
the unit or scratch the discs.
• Do not use cracked or warped discs or discs that have been repaired
with adhesive, etc.
• Do not use discs on which the sticky part of cellophane tape or
labels is exposed or on which there are traces of where labels have
been removed. Such discs can get caught inside the player and
damage it.
• Do not use discs in special shapes, as they may damage the
player.
• Do not push the disc tray in by hand when the power is off.
Doing so could damage the set.
If a disc that cannot be played is loaded or the disc is loaded up-
sidedown, “NO DISC” is displayed on the player’s display.
How to Handle Media
• Do not get ngerprints, oil or dirt on discs.
• Take special care not to scratch discs when removing them from
their cases.
• Do not bend or heat discs.
• Do not enlarge the hole in the center.
• Do not write on the labeled (printed) surface with ball-point pens,
pencils, etc., or stick new labels on discs.
• Condensation may form on discs if they are moved suddenly from
a cold place (outdoors for example) to a warm place, but do not try
to dry discs with a hairdryer, etc.
• Do not eject a SD Memory Card or turn off the DBP-A100 while a
card is being played. This may result in malfunction or loss of the
card’s data.
• Do not attempt to open or modify SD Memory Cards.
• SD Memory Cards and les can be damaged by static electricity.
Do not touch the metal contacts of an SD Memory Card with your
ngers.
• Do not use warped SD Memory Cards.
• After use, be sure to remove any disc or SD Memory Card, and store
it in its proper card case, to avoid dust, scratches and deformation.
• Do not store discs in the following places:
1.Places exposed to direct sunlight for long periods of time
2.Dusty or humid places
3.Places exposed to heat from heaters, etc.
Cleaning Discs
• If there are ngerprints or dirt on a disc, wipe them off before using
the disc.
• Use a commercially available disc cleaning set or a soft cloth to
clean discs.
Gently wipe the disc from the
inside towards the outside.
Do not wipe with a circular
motion.
NOTE
Do not use record spray, antistatic agents, benzene, thinner or other
solvents.
About Copyrights
• Unauthorised copying, broadcasting, public performance and
lending of discs are prohibited.
• This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
• This item incorporates copy protection technology that is protected
by U.S. patents and other intellectual property rights of Rovi
Corporation. Reverse engineering and disassembly are prohibited.
• Portions of this product are protected under copyright law and
provided under license by ARIS/SOLANA/4C.
Getting Started
Inserting an SD Memory Card
• Insert an SD Memory Card in the
direction of the arrow into the SD
CARD slot with the label facing up.
• Insert the card straight into the SD
CARD slot until it clicks.
• To remove the card, push it in and then
release to eject.
SD
Memory Card
SD
Memory Card
1.DBP-A100_E3_ENG_007.indd 6 2010/08/12 19:20:06
Loading ...
Loading ...
Loading ...