Loading ...
Loading ...
Loading ...
ENGLISH
3
TroubleshootingInformationHDMI Control FunctionPlaybackSetupConnections Specications
• Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
• Power is supplied to some of the circuitry even when the unit is set
to the standby mode. When leaving home for long periods of time,
be sure to unplug the power cord from the power outlet.
• Image persistence (image burn-in)
Do not leave still images of the disc menu, DBP-A100 menu, etc.,
displayed on the TV screen for long periods. This can result in image
persistence (image burn-in) on the screen.
• About Condensation
If the DBP-A100 unit is moved from a cold place to a warm place, or
installed in a room subject to rapid temperature rise from a heater,
etc., condensation may form on parts inside the unit (operating
parts and lenses).
If used under this condition, the DBP-A100 will not operate correctly
and damage may result. If condensation forms on the unit, leave the
DBP-A100 off for 1 to 2 hours before using it again.
• Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from the unit when it is in
use.
• Moving the unit
Be sure to remove a disc, turn off the power and unplug the power
cord from the power outlet. Next, disconnect the connection cables
to other system equipment before moving the unit.
• About Care
• Wipe the cabinet and control panel clean with a soft cloth.
• Follow the instructions when using a chemical cleaner.
• Benzene, paint thinner or other organic solvents, as well as
insecticide, may cause material changes and discoloration if brought
into contact with the unit, and should, therefore, not be used.
• Proper Ventilation
If the unit is left in a room full of the smoke from cigarettes, etc., for
long periods of time, the surface of the optical pickup may get dirty,
preventing it from receiving signals inproperly.
• Note that for explanatory purposes the illustrations in these
instructions may differ from the actual unit.
Cautions on Handling About Media
Playable Media
Playable Media
Playable
formats/
modes
Playable
region codes
Symbols
Used
in this
Owner’s
Manual
BD-Video
z1,z2
–
Discs with
BD
DVD-Audio
z1
–
–
DVD-A
DVD-Video
z1,z2
Include region
ALL
1
DVD-V
DVD-R,
DVD+R
Video
mode,
AVCHD
format
–
DVD
DVD-RW,
DVD+RW
Super Audio
CD
– –
SA-CD
CD
– –
CD
CD-R
CD-RW
Discs
z1 :
BD-Video/DVD-Audio/DVD-Video discs may not operate as
described in this manual due to menu structure.
z2 :
BD players and BD-Video discs, and DVD players and DVD-
Video discs each have their region codes (codes assigned
for each region). Playback is not possible if the codes do not
match.
Getting Started
See overleaf
1.DBP-A100_E3_ENG_007.indd 3 2010/08/12 19:20:04
Loading ...
Loading ...
Loading ...