Loading ...
Loading ...
Loading ...
TroubleshootingInformationHDMI Control FunctionPlaybackConnectionsGetting Started Speci cations
ENGLISH
24
HDMI Setup
Setting items
Setting contents
Audio Setup
GMulti LPCM BM OffH : Decoded Linear PCM multi-channel signal is
output by the DBP-A100. This setting is not made in speaker settings.
(BM: Bass Management)
G2ChH : Outputs the downmixed 2-channel LPCM signal.
GMuteH : Does not output audio from HDMI.
SA-CD Audio Out
Sets to output the stereo/
multi area audio of Super
Audio CD to the HDMI
terminal.
On : Super Audio CD audio is output.
Off : Super Audio CD audio is not output.
The Super Audio CD audio signal is a 44.1 kHz/16-bit Linear PCM output.
HDMI Control
Can operate the unit in
conjunction with an HDMI
control supported device.
GControlH
• Off : Disables the HDMI control function.
• On : Links with the device connected to HDMI.
GPower Off ControlH
• On : Turns the DBP-A100’s power to standby through linkage to the TV.
• Off : Does not turn the DBP-A100's power to standby through linkage
to the TV.
• For the HDMI control function to operate, it is necessary for the DBP-
A100 or HDMI-compatible TV connected to the DBP-A100 to have an
HDMI connection.
• Refer to “HDMI Control Function” (vpage 449) for more information
on HDMI control functions.
• The HDMI control function from the connected device is enabled when,
on the GUI menu, “DENON LINK Setup” – “DENON LINK Mode” is set
to “4th” (vpage 28).
• After the “HDMI Control” setting has been changed, always turn off the
power to the connected equipment and then turn it back on.
NOTE
If you set “DENON LINK Setup” – “DENON LINK Mode” on the GUI menu to “4th”, you will no longer be
able to change the “HDMI Control” – ”Control” setting. To change the setting, switch the “DENON LINK
Mode” to a setting other than “4th” rst and then change the setting.
Setting items
Setting contents
TV Aspect (Aspect ratio)
Set the screen type and
display mode of the TV.
16:9 Squeeze Auto : Outputs to a wide screen TV. For 4:3 video, displays
in the center of the screen without changing the aspect ratio. z1
WIDE (16:9) : Outputs to a wide-screen TV.
4:3 PS : Outputs to a 4:3 TV. For wide video, trim the left and right side of
the image and display in 4:3 aspect ratio. z2
4:3 LB : Outputs to a 4:3 TV. Displays all of the wide video.
Component Resolution z3
Sets the component output
resolution.
480/576i, 480/576P, 720P, 1080i,
Source Direct : Outputs video using its source resolution. Converts a
1080p video source to 1080i.
Progressive Mode
Sets an appropriate
progressive conversion
mode for the source video
material.
Auto : Detects the type of video material and automatically switches the
mode. Normally, this setting is used.
Video1 : Suitable for playing video material discs.
Video2 : Suitable for playing video material discs or 30-frame lm material
discs.
TV Active Area
Sets the horizontal display
range when the analog
video output resolution is
480i/576i.
Full : Setting when a home-use monitor is connected.
Normal : This setting is used when video synchronization is disturbed on
a professional-use monitor.
This is not available for HDMI output.
z1 :
This has no effect on the video and S-Video outputs.
z2 :
Depending on the video content, even though you set it to 4:3 PS ( Pan Scan), the content may be
output in 4:3 LB ( Letter Box).
z3 :
When video is output from the HDMI terminal, no video signal is output from the component
terminals.
Set the video output signal according to the connected TV.
Video Setup
Default settings are underlined.
Remote control operation
buttons
:
Displays the menu
Cancels the menu
:
Moves the cursor
(Up/Down/Left/Right)
:Makes the setting :Returns to previous menu
Setup
1.DBP-A100_E3_ENG_007.indd 24 2010/08/12 19:20:17
Loading ...
Loading ...
Loading ...