Loading ...
Loading ...
Loading ...
ENGLISH
33
TroubleshootingInformationHDMI Control FunctionPlaybackSetupConnectionsGetting Started SpecicationsSetup
Setting items
Setting
contents
Default
DNR
Reduces noise in the entire
picture.
0 ~ +3 0
Contrast
Adjusts picture contrast.
–6 ~ +6
0
Brightness
Adjusts picture brightness.
0 ~ +12 0
Enhancer
z
3
Strengthens the contours of
the picture.
0 ~ +11 0
Gamma Correction
z
1
Adjusts video brightness in
detail.
G0 ~ 9
G0 = 24 / G1 = 32
G2 = 48 / G3 = 64
G4 = 80 / G5 = 96
G6 = 128 / G7 = 160
G8 = 192 / G9 = 224
Sharpness (medium range)
z
1, 3
Adjusts picture sharpness
for the medium frequency
range.
–6 ~ +6
0
Sharpness (high range)
z
3
Adjusts picture sharpness
for the higher frequency
range.
–6 ~ +6 0
Hue (color tone)
z
4
Adjusts the green and red
color balance.
–6 ~ +6 0
White Level
Adjusts the white level.
–5 ~ +5 0
Black Level
z
3
Adjusts the black level.
–5 ~ +5 0
Chroma Level
Adjusts the color density.
–6 ~ +6 0
Setup Level
z
2
Adjusts the black areas of
the image.
0 IRE
7.5 IRE
7.5 IRE
H.Position
z
3
Adjusts the left/right
position.
–7 ~ +7 0
V.Position
z
3
Adjusts the top/bottom
position.
–7 ~ +7 0
You can adjust the picture quality to your liking.
You can store up to a maximum of 5 values in memory.
n To Finalize Picture Adjustments
Press with the picture adjusted.
n When Outputting Standard Picture Quality without
Using Picture Adjustment
Press and to select “Standard” and then press .
Gamma Correction
When you select “Gamma Correction”, and then press , you can
change the setting with .
In the example of the graph below, the horizontal axis shows the
brightness level of the pictured recorded on the disc. The vertical axis
shows the brightness of the picture output by the DBP-A100.
PICT
Gamma CorrectionMemory 5
0
0
255
255
G0:024
• When the brighter areas on the disc side are adjusted to be output
darker, the normally hard to see bright parts become clearly
discernible images.
PICT
Gamma CorrectionMemory 5
0
0
255
255
G0:024
• When the darker areas on the disc side are adjusted to be output
brighter, the normally hard to see dark parts become clearly
discernible images.
n Resuming Initial Values after Gamma
Correction
Press while the graph is displayed.
The picture adjustment settings are retained in memory even after
the power is turned off.
Adjusting the Picture Quality (Picture Control)
1
Press .
The currently set status is displayed.
2
Select the memory number you want (“Memory 1” ~
“Memory 5”) with , and then press .
Standard
Memory 1
Memory 5
PICT
3
Select the item(s) you wish to change
with .
Memory 1
DNR
Contrast
V.Position
0
0
0
4
Change the setting with .
b Refer to the table on the right for information on the different
settings.
z1：This is not available for HDMI output.
z2： Effective only for the 480i video signal from the video output terminal, S
video output terminal, and component video output terminal.
z3： This has no effect with the video and S-Video outputs.
z4： This has no effect with the video and S-Video outputs when playing PAL
video.
1.DBP-A100_E3_ENG_007.indd 33 2010/08/12 19:20:20
Loading ...
Loading ...
Loading ...