Loading ...
Loading ...
Loading ...
Black plate (96,1)
北米Model "A8190BE-C" EDITED: 2013/ 8/ 6
2-2
Keys and doors/Keys
Keys
NOTE
For models with “keyless access with
push-button start system”, refer to
“Keyless access with push-button start
system” F2-8.
1) Master key
2) Submaster key
3) Valet key
4) Key number plate
Three types of keys are provided for your
vehicle:
Master key, submaster key and valet key.
The master key and submaster key fit all
locks on your vehicle.
. Ignition switch
. Driver’s door
. Glove box
The valet key fits only the ignition switch
and door locks. You can keep the glove
box locked when you leave your vehicle
and valet key at a parking facility.
CAUTION
Do not attach a large key holder or
key case to either key. If it bangs
against your knees while you are
driving, it could turn the ignition
switch from the “ON” position to the
“ACC” or “LOCK” position, thereby
stopping the engine.
& Key number plate
The key number is stamped on the key
number plate attached to the key set.
Write down the key number and keep it in
another safe place, not in the vehicle. This
number is needed to make a replacement
key if you lose your key or lock it inside the
vehicle. Refer to “Key replacement” F2-3.
Immobilizer
The immobilizer system is designed to
prevent an una uthorized pe rson from
starting the engine. Only keys registered
with your vehicle’s immobilizer system can
be used to operate your vehicle.
For models with “keyless access with
push-button start system”:
If you press the push-button ignition
switch when carrying an unregistered
access key, the switch will not turn to the
“ON” position and the engine will not start.
For models without “keyless access
with push-button start system”:
Even if an unregistered key fits into the
ignition switch and can be turned to the
“START” position, the engine will auto-
matically stop after several seconds.
Each immobilizer key contains a trans-
ponder in which the key’s ID code is
stored. The transponder transmits the
key’s ID code to the immobilizer system’s
receiver under any of the following condi-
tions.
. When an access key is detected within
the operating range of the antennas inside
the vehicle (models with “keyless access
with push-button start system”)
. When a key is inserted into the ignition
Loading ...
Loading ...
Loading ...