Loading ...
Loading ...
Loading ...
Black plate (495,1)
北米Model "A8190BE-C" EDITED: 2013/ 8/ 6
sembly rearward and remove it from the
vehicle.
1) Stop/tail light (This light is also used as
the rear side marker light.)
2) Backup light
3) Rear turn signal light
4) Tail light
3. Remove the bulb socket from the rear
combination light assembly by turning it
counterclockwise.
4. Pull the bulb out of the bulb socket and
replace it with a new one.
5. Set the bulb socket into the rear
combination light assembly and turn it
clockwise until it locks.
1) Guide pins
2) Clip
6. Put the rear combination light assem-
bly into place while aligning the 2 guide
pins and a catch with the guide holes and
a clip on the vehicle.
7. Tighten the upper and lower screws.
& License plate light
1. Insert a finger into the right side of the
license plate light cover, then press once
to the left and pull out to remove the cover.
Maintenance and service/Replacing bulbs
11-41
– CONTINUED –
11
Loading ...
Loading ...
Loading ...