Loading ...
Loading ...
Loading ...
Black plate (60,1)
北米Model "A8190BE-C" EDITED: 2013/ 8/ 6
1-34
Seat, seatbelt and SRS airbags/Child restraint systems
Your vehicle is equipped with four lower
anchorages (bars) and three upper an-
chorages (tether anchorages) for accom-
modating such child restraint systems.
The lower anchorages (bars) are used for
installing a child restraint system only on
the rear seat window-side seating posi-
tions. For each window-side seating posi-
tion, two lower anchorages are provided.
Each lower anchorage is located behind
the cover of the seatback bottom.
The tether anchorages (upper an-
chorages) are provided at the locations
shown in the above illustration. For de-
tails, refer to “ Top tether anchorages” F1-
36.
To install a child restraint system using
lower and tether anchorages, perform the
following procedure.
WARNING
Before installing a child r estraint
system, be sure to confirm that the
seatback is s ecurely locked into
place. Otherwise, in an accident,
serious injury or death could result.
1. Shake the seatback slightly to confirm
that it is securely locked into place.
– It is possible to check whether the
seatback is locked visually. If the
seatback is locked into place, the red
colored unlocking marker which is
attached to the bottom of the lock
release knob is invisible. For details,
refer to “Folding down the rear seat-
back” F1-10.
2. You will find marks “ ” at the bottom of
the rear seat seatbacks. These marks
indicate the positions of the lower an-
chorages (bars).
Loading ...
Loading ...
Loading ...