Owner’s Manual - Page 67

For 2010 SEAT ALHAMBRA.

Loading ...
Loading ...
Loading ...
Cockpit66
Mileage
The odometer registers the total distance travelled by the car.
The trip recorder (trip) shows the distance travelled since the last trip recorder
reset. The last digit of the trip recorder indicates distances of 100 metres or
tenths of a mile.
Outside temperature display
When the outside temperature is below +4 °C (+39 °F), the symbol “ice
crystal” (warning of risk of freezing) is also displayed next to the temperature.
At first this symbol flashes and then it remains lit until the outside tempera-
ture rises above +6 °C (+43 °F) .
When the vehicle is at a standstill, with the parking heating on ( page 187),
or when travelling at very low speeds, the temperature displayed may be
higher than the true outside temperature, as a result of the heat produced by
the engine.
The temperatures measured range from -40 °C to +50 °C (-40 °F to +122 °F).
Compass
With the ignition on and the navigation system on, the cardinal point corre-
sponding to the vehicle's direction of travel is displayed on the instrument
panel page 67.
Selector lever positions
The range of engaged gears of the selector lever is shown on the side of the
lever, and on the instrument panel display. In positions D and S, and with the
Tiptronic, the corresponding gear is also displayed.
Recommended gear (manual gearbox)
The recommended gear to save fuel is displayed on the instrument panel
while you are driving page 201.
Second speed display (mph or km/h)
In addition to the speedometer, the speed can also be displayed in a different
unit of measurement (in miles or in km per hour). To change the units, in the
Settings menu, select the option Second speed page 70.
Vehicles without menu display on the instrument panel
x Switch on the engine.
x Press button three times. The odometer display flashes on the instru-
ment panel display.
x Press button once. “mph” or “km/h” is displayed briefly instead
of the odometer.
x This activates the second speed display. To switch it off, repeat the proce-
dure.
This option cannot be disconnected in models destined for countries in which
the second speed must always be visible.
Type of mes-
sage
Symbol
colour
Meanings
Priority 1
warning.
Red
Symbol flashing or lit; partly combined with
audible warnings.
Stop the vehicle! It is dangerous !
Check the function which is faulty and repair.
If necessary, request assistance from special-
ised personnel.
Priority 2
warning.
Yellow
Symbol flashing or lit; partly combined with
audible warnings.
A faulty function, or fluids which are below the
correct levels may cause damage to the vehi-
cle!
Check the faulty function as soon as possible.
If necessary, request assistance from special-
ised personnel.
Informative
text.
Information relating to different vehicle proc-
esses.
¡
0.0 / SET
Loading ...
Loading ...
Loading ...