Loading ...
Loading ...
Loading ...
Wheels and tyres 337
Safety First Operating instructions Practical tips Technical Data
Vehicles with removable hubcaps
x To remove the hubcap, take the wire hook from the vehicle tool kit and
hook it through an opening on the trim page 336, fig. 186.
x Remove the trim by pulling it in the direction of the arrow.
x To replace the hubcap, press the hubcap against the rim until it clicks into
place.
Vehicles with screw-on hubcaps
x To remove, turn the hubcap to the right or to the left until it comes off the
rim page 336, fig. 187.
x Hold it from behind by a rib and pull the trim.
x To replace, centrally align the trim on the wheel.
x Press the trim against the wheel rim until it clicks into place.
Full hubcaps*
Removing the full hubcap
x Take the wheel brace and the wire hook from the vehicle tool kit
page 353.
x Hook the wire through one of the grooves on the hubcap.
x Insert the wheel brace onto the wire hook fig. 188 and pull the hub cap
in the direction shown by the arrow.
Fitting hubcaps
Before mounting the full hubcap, the anti-theft wheel lock must be threaded
into position page 340, fig. 191 or . Otherwise it will not be
possible to mount the full hubcap.
Press the hubcap against the wheel so that the space for the valve fits over
the tyre valve page 340, fig. 191 . Make sure that the hubcap is
correctly fitted all the way around the wheel.
Wheel bolt caps
Fig. 188 Removing the
full hubcap.
A
2
A
3
A
1
Fig. 189 Removing the
wheel bolt caps
Loading ...
Loading ...
Loading ...