Loading ...
Loading ...
Loading ...
Seat belts 23
Safety First Operating instructions Practical tips Technical Data
Fastening or unfastening a seat belt with one buckle
Properly worn seat belts hold the vehicle occupants in the position that most
protects them in the event of an accident or sudden braking .
Fastening the seat belt
Fasten your seat belt before each trip.
x Adjust the front seat and head restraint correctly page 10.
x Engage the backrest of the rear seat in an upright position .
x Pull the latch plate and place the belt webbing evenly across your chest
and lap. Do not twist the seat belt when doing so .
x Engage the latch plate in the buckle of the corresponding seat fig. 10.
x Pull the belt to ensure that the latch plate is securely engaged in the
buckle.
Unfastening the seat belt
The seat belt must not be unfastened until the vehicle has come to a standstill
.
x Press the red button on the buckle fig. 11. The latch plate is released
from the buckle.
x Guide the belt back by hand so that it rolls up easily and the trim will not
be damaged.
WARNING
An incorrectly worn seat belt web can cause severe or fatal injuries in the
event of an accident.
x The seat belt cannot offer its full protection unless the backrests are in
an upright position and the seat belt is worn correctly, according to your
size.
x Unbuckling your seat belt while the vehicle is in motion can cause
severe or fatal injuries in the event of an accident or sudden braking.
Fig. 10 Insert the latch
plate into the buckle.
Fig. 11 Release the latch
plate from the buckle.
Loading ...
Loading ...
Loading ...