Loading ...
Loading ...
Loading ...
Child safety46
Different mounting systems
Always secure child seats properly and safely in the vehicle according to the
child seat manufacturer's installation instructions.
Mounted child seats must rest correctly on the vehicle's seat and must not
move or rock more than 2.5 cm (1 inch).
Child seats equipped for a Top Tether strap must also be secured using the
Top Tether retaining strap in the vehicle page 50. Only secure the retaining
belt to the rings fitted for this purpose and identified as Top Tether. Not all
rings can be used with the Top Tether system. Always tighten the Top Tether
retaining strap so that the child seat fits snugly against the corresponding
seat in the vehicle.
Specific mounting systems for each country
Europe: ISOFIX retaining rings and upper retaining strap page 49 and
page 50.
Retaining rings and upper retaining strap:
USA: LATCH (Lower Anchors and Tethers for CHildren)
Canada: lower universal anchorages
page 49.
Three-point seat belt and upper retaining strap page 48.
The systems include the child restraint system mounting with an upper
retaining strap (Top Tether) and lower anchoring points on the seat.
Use of the child seat on the front passenger seat
Transporting children on the front passenger seat is not permitted in all coun-
tries. Furthermore, not all child seats are approved for use on the front
passenger seat. Your SEAT qualified workshop has an updated list of all
approved child seats. Only used child seats that are approved for each
vehicle.
Fig. 26 On the rear seats: Figures and show the
basic child restraint system mounting using lower
retaining rings and the upper retaining strap. Figure
shows the child restraint system mounting using the
vehicle's seat belt.
A
A
A
B
A
C
A
A
A
B
A
C
Loading ...
Loading ...
Loading ...