Loading ...
Loading ...
Loading ...
Lights and visibility120
function is switched on. If the equipment includes the light sensor, the
lighting around the exterior mirrors only comes when it is dark.
Note
The time taken for the headlights to go off can be changed in the menu Lights
& Visibility and the function can be switched on or off page 70.
Note
When the “Coming home” function is on, if the vehicle door is opened there
is no audible warning signal to advise that the light is still on.
Headlight range control, instrument and switch lighting
Instrument and switch lighting
When the headlights are switched on, the brightness of the instruments and
switch lighting can be regulated to suit your requirements by turning the
switch fig. 68 .
Headlight range control
The headlight range control fig. 68 is modified according to the value
of the headlight beam and the vehicle load status. This offers the driver
optimum visibility and the headlights do not dazzle oncoming drivers .
The headlights can only be adjusted when the dipped beam is switched on.
To reset, turn switch fig. 68 :
Dynamic headlight range control
The control is not mounted in vehicles with dynamic headlight range
control. The headlight range is automatically adjusted according to the
vehicle load status when the headlights are switched on.
WARNING
Heavy objects in the vehicle may mean that the headlights dazzle and
distract other drivers. This could result in serious accident.
Fig. 68 Next to the
steering wheel: instru-
ment and switch lighting
control and headlight
range control .
A
1
A
2
Value
Vehicle load status
a)
a)
If the vehicle load does not correspond to those shown in the table, it is possible to
select intermediary positions.
– Two front occupants, luggage compartment empty
1 All seats occupied, luggage compartment empty
2
All seats occupied, luggage compartment full. With trailer
and minimum support load
3
Driver only, luggage compartment full. With trailer and
maximum support load
A
1
A
1
A
2
A
2
A
2
A
2
Loading ...
Loading ...
Loading ...