Loading ...
Loading ...
Loading ...
If and when364
To replace the xenon headlights bulb
There is no need to remove the headlight to replace bulbs.
Complete operations only in the sequence given:
Always seek the help of a specialist when changing the Xenon dipped beam
and full beam headlamps in “Introduction” on page 360.
Note
The illustrations show the left hand headlight. The structure of the right hand
side headlight is symmetric.
Fig. 215 In the engine
compartment: Turn signal
cover.
Fig. 216 Turn signal indi-
cator lamp holder and
turning light .
A
1
A
2
Turn signal indicators Turning lights
1.
Always take the checklist into account and take the necessary
actions page 361.
2.
Open the bonnet page 304.
3.
Rotate the cover fig. 215 in the direction of the arrow and remove
it.
4.
Rotate the lamp holder
fig. 216 to the left all the way
and pull it out backwards with the
bulb.
Press the wire clip downwards
and pull the lamp holder
fig. 216 out with the bulb.
5.
Depending on the model, the bulb is removed directly from the lamp
holder or it may need to be rotated and then removed.
6. Replace the faulty bulb by a new identical bulb.
7.
Place the bulb holder in the head-
light and rotate to the right all the
way.
Place the lamp holder in the
headlight and pull the wire clip
upwards until it clicks into place.
8.
Rotate the cover fig. 215 in the opposite direction to the arrow as
far as it will go.
A
1
A
2
A
1
A
2
Loading ...
Loading ...
Loading ...