Owner’s Manual - Page 105

For 2010 SEAT ALHAMBRA.

Loading ...
Loading ...
Loading ...
Unlocking and locking104
To stop the one touch function: Push or pull on the button of the corre-
sponding window.
Restoring one-touch opening and closing
The one-touch opening and closing function is not active after the vehicle
battery has been disconnected or is flat and will have to be reset.
x Close all windows and doors.
x Pull the button of the corresponding window and hold it for one second in
this position.
x Release the button and pull upwards and hold again. The one-touch func-
tion is now ready for operation.
The automatic one-touch electric windows can be reinitialised individually or
several at a time.
Convenience opening and closing function
The electric windows can be opened or closed from outside using the vehicle
key:
x Hold in the unlocking for locking button for the vehicle. All windows which
function electrically will be either opened or closed.
x To interrupt the function, release the locking or unlocking button.
During convenience closing, first the windows and then the sliding sunroof
will be closed.
In the Configuration - convenience menu, there are different settings for oper-
ating the windows page 70.
WARNING
Careless use of the electric windows can cause serious injury.
x Only operate the electric windows when nobody is in the way.
x Never leave children or disabled people alone in the vehicle if the doors
are to be locked. The windows cannot be opened in case of an emergency.
x Always take all the keys with you whenever you leave the vehicle. After
turning off the ignition, the windows can be opened and closed for a short
time using the buttons on the door as long as the driver's door or
passenger side door is not open.
x When transporting children in the rear seats, always deactivate the rear
electric windows with the child safety lock so that they cannot be opened
and closed.
Note
The one-touch function and roll-back function will not work if there is a
malfunction in the electric windows. Visit a specialist workshop.
Electric Windows anti-trap function
The anti-trap function of the electric windows can reduce the risk of injury
when opening and closing the electric windows . If a window is not able
to close because it is stiff or because of an obstruction, it will automatically
open again.
x Check why the window does not close.
x Attempt to close the window again.
x If you try within the following 10 seconds and the window closes with
difficulty or there is an obstruction once again, the one-touch closing will stop
working for 10 seconds.
x If the window is still obstructed, it will stop at the corresponding position.
When the button is operated within 10 seconds, the window will close
without the anti-trap function .
WARNING (continued)
Loading ...
Loading ...
Loading ...