Loading ...
Loading ...
Loading ...
If and when 377
Safety First Operating instructions Practical tips Technical Data
Fitting the front tow ring
The location for the removable tow ring is on the right-hand side of the front
bumper fig. 228.
The towing eye should always be kept in the vehicle.
Note the instructions for towing page 376.
To fit the tow ring
x Take the tow ring from the vehicle tool kit page 353.
x Press on the upper cover and carefully remove it forwards. Allow the cover
to hang.
x Screw in the tow ring into its position anticlockwise as far as it will go
fig. 228 . Use a suitable tool to firmly tighten the tow ring in its loca-
tion.
x After towing, remove the tow ring by turning it clockwise and put the cover
back in place.
Caution
The tow ring must always be completely and firmly tightened. Otherwise, it
could be released while towing and tow-starting.
Fitting the rear tow ring
The location for the removable tow ring is on the right-hand side of the rear
bumper fig. 229. For vehicles with a factory fitted trailer system, there is no
fitting behind the cover to insert the tow ring. For towing, fit and use the trailer
hitch page 260, .
Note the instructions for towing page 376.
Fitting the tow ring to the rear for vehicles without factory fitted tow hitch
x Take the tow ring from the on-board tools page 353.
x Press on the upper cover and carefully remove it back. This may require
some strength. Allow the cover to hang.
Fig. 228 On the right-
hand side of the front
bumper: Screw in the
towing ring.
Fig. 229 On the rear
bumper, to the right hand
side: Tow ring in position.
Loading ...
Loading ...
Loading ...