Loading ...
Loading ...
Loading ...
Black plate (499,1)
北米Model "A2490BE-B" EDITED: 2012/ 7/ 6
1) Tail and rear side marker light
2) Stop light
3) Rear turn signal light
5. Remove the bulb holder from the rear
combination light assembly by turning it
counterclockwise.
6. Pull the bulb out of the bulb holder and
replace it with a new one.
7. Set the bulb holder into the rear
combination light assembly and turn it
clockwise until it locks.
8. Reinstal l t he rear combination light
assembly by sliding the two-pronged part
of the combination light assembly securely
to each holder of the vehicle side.
9. Tighten the upper and lower screws.
10. Reinstall the side cover.
& Tail/Backup light (Outback)
1. Apply a flat-head screwdriver to the
light cover as shown in the illustration, and
pry the light cover off from the rear gate
trim.
Maintenance and service 11-49
– CONTINUED –
11
Loading ...
Loading ...
Loading ...