Loading ...
Loading ...
Loading ...
Black plate (212,1)
北米Model "A2490BE-B" EDITED: 2012/ 7/ 6
3-40 Instruments and controls
By operating the “ ” or “ ” switch on the
steering wheel, you can select the menu.
Pull the “
/SET” switch to enter the
selected menu.
NOTE
If you enter the “Return” menu, the
system will return to the previous
screen.
! Screen Settings
After entering the “Screen Settings” menu,
select one of the following menus.
! Welcome Good-bye Screen
The welcome screen/good-bye screens
can be activated or deactivated. Select
“On” to activate the screens. Select “Off”
to deactivate the screens.
! Gauge Initial Movement
The movement of the meter needles and
gauge needles that occurs when the
ignition switch is turned to the “ON”
position can be activated or deactivated.
Select “On” to activate. Select “Off” to
deactivate.
! Languages
Operate the “
” or “ ” switch on the
steering wheel to display the preferred
language. Then pull the “
/SET” switch to
select the displayed language.
! EyeSight (models with EyeSight
system)
NOTE
For models with the EyeSight system,
refer to the Owner’s Manual supple-
ment for the EyeSight system.
After entering the “EyeSight ” menu, select
one of the following menus.
! Warning Volume
The volume of the warning buzzer that
sounds when the EyeSight system is in
use can be set in 3 stages (“Max”, “Mid”
and “Min”).
! Lead Vehicle Acquisition Sound
When adaptive cruise control is used, the
buzzer that sounds if a vehicle is detected
in front or if detection is not possible can
be activated or deactivated. Select “On” to
activate the buzzer. Select “Off” to deac-
tivate the buzzer.
! Lead Vehicle Moving Monitor Func-
tion
When adaptive cruise control is used, the
buzzer that sounds if a vehicle in front has
started can be activated or deactivated.
Select “On” to activate the buzzer. Select
“Off” to deactivate the buzzer.
! Auto Light Sensor
The operational sensitivity of the auto on/
off headlights can be set. You can select
“Min”, “Low”, “Mid” or “Max”.
! Default Settings
Select “Yes” to use the menu screen to
restore customized settings to the factory
default settings. Select “No” to return to
the previous screen without restoring to
the factory default settings.
Loading ...
Loading ...
Loading ...