User Manual - Page 452

For 2013 LEGACY 3.6R LIMITED.

Loading ...
Loading ...
Loading ...
Black plate (463,1)
Model "A2490BE-B" EDITED: 2012/ 7/ 6
CAUTION
. For 2.5 L models, be careful not
to touch the engine oil filter when
removing the oil filler cap. Doing
so may result in a burn, a
pinched finger, or may c ause
some other injury.
. Use only engine oil with t he
recommended grade and vis-
cosity.
. Be careful not to spill engine oil
when adding it. If oil touches the
exhaust pipe, it may cause a bad
smell, smoke, and/or a fire. I f
engine oil gets on the exhaust
pipe, be sure to wipe it off.
. If the level gauge cannot be
pulled out easily, twist the level
gauge right and left, then gently
pull it out. Otherwise, you may be
injured by accidentally straining
yourself.
To add engine oil, remove the engine oil
filler cap and slowly po ur en gine oi l
through the filler neck. After pouring oil
into the engine, you must use the level
gauge to confirm t hat the oil leve l is
correct.
NOTE
To prevent overfilling the engine oil, do
not add any additional oil above the full
level when the engine is cold.
& Changing the oil and oil filter
CAUTION
. If you change your own oil, be
sure to drain all the oil from the
filter before disposal.
. Do not dispose of used engine oil
by placing it in the trash, or by
pouring it onto the ground, into
sewers, or into any body of water.
Check with your local govern-
ment office for the proper dis-
posal options available to you.
Change the oil and oil filter according to
the maintenance schedule in the War-
ranty and Maintenance Booklet.
The engine oil and oil f ilter must be
changed more frequently than listed in
the maintenance schedule when driving
on dusty roads, when short trips are
frequently ma de, or when driv ing in
extremely cold weather.
1. Warm up the engine by letting the
engine idle for approximately 10 minutes
to ease draining the engine oil.
2. Park the vehicle on a level surface and
stop the engine.
3. Remove the oil filler cap.
2.5 L models
3.6 L models
4. Drain out the engine oil by removing
Maintenance and service 11-13
CONTINUED
11
Loading ...
Loading ...
Loading ...