Loading ...
Loading ...
Loading ...
61
Remember, a small adjustment can make a dramatic dierence!
Turn the bolt clockwise to move the belt to the right. Turn the bolt
only a 1/4 turn and wait a few minutes for the belt to adjust itself.
Continue to make 1/4 rotation turns until the belt stabilizes in the
center of the running deck.
The belt may require periodic tracking adjustment depending on use
and walking/ running characteristics. Some users will aect tracking
dierently. Expect to make adjustments as required to center the
tread-belt. Adjustments will become less of a maintenance concern
as the belt is used. Proper belt tracking is an owner responsibility
common with all treadmills.
Attention
Damage to the running belt resulting from improper tracking /
tension adjustments is not covered under the warranty.
Maintenance menu in console software
The console has built in maintenance/diagnostic software. The soft-
ware will allow you to change the console settings from English to
Metric and turn o the beeping of the speaker when a key is pressed
for example. To enter the maintenance menu (may be called Engi-
neering mode, depending on version) press and hold down the Start,
Stop and Enter keys. Keep holding the keys down for about 5 seconds
and the message window will display “Maintenance mode”. Press the
enter button to access the menu below:
Maintenance mode
• Press and hold the start, stop and enter key at the same time, until the
display shows “Maintenance mode”. Press the enter key. You can now
scroll through the menu using the up and down keys. Use the stop key
to return to previous menu selection. The menu selections are:
Loading ...
Loading ...
Loading ...