Loading ...
Loading ...
Loading ...
25
Forward
This key sets the belt direction to forward. Forward is the default
direction setting when the treadmill is powered on and any time the
console is in the idle mode. If the belt is already set in the reverse
direction, it will change the direction of the belt to forward. If the belt
is moving in reverse when the key is pressed the belt will slow down
to zero speed and then speed changes in the forward direction are
allowed.
Reverse
This key sets the belt direction to reverse if the belt is already set to
forward direction. This function only operates in quick start or manual
mode. If the belt is moving when the key is pressed the belt will slow
down to zero speed then allow speed changes in the reverse
direction. The speed window will show a minus (-) sign indicating the
speed is set to reverse.
Acceleration - Deceleration
This function adjusts the acceleration and deceleration rate of the
walking belt by allowing you to change the amount of time it takes for
the belt to change speeds. The adjustment value is in seconds. You
can input how many seconds it takes for the belt to change 1 mph of
speed. The default setting is 3 seconds, which means the belt will
take 3 seconds to go from zero to 1 mph. The range can be set from 1
second to 60 seconds. This function can be disabled in the
Maintenance mode (see page 58).
Incline
Press this key to return to front incline function if decline function is
active.
Loading ...
Loading ...
Loading ...