Loading ...
Loading ...
Loading ...
19
The 7.0 T is an easy product to set up and use, from the adjustments to
the intuitive interface. This section explains how to set up, adjust and
operate your 7.0 T.
Leveling the 7.0 T
Once the 7.0 T is assembled, and placed on a ๎at level ๎oor, it may be
necessary to adjust the four leveling glides on the bottom of the rear
incline unit to ensure proper stability of the 7.0 T. Use a 1/2โ wrench
to loosen the top nut of the leveler. Adjust the levelers by hand as
necessary to remove any wobble in the unit. Then tighten the top nut
against the bottom of the stabilizer tube. Make sure the bottom nut
remains cinched against the leveling foot.
Connecting to A.C. power
The 7.0 T A.C. mains input connector is located in the front of the unit.
The input module has an input connector for the line cord, a power
switch and a 20 amp circuit breaker. Turn the power switch to o๎
when the 7.0 T is not in use.
Lift bar
Vertical adjustment Horizontal adjustment
Loading ...
Loading ...
Loading ...