Loading ...
Loading ...
Loading ...
25
ELECTRICAL CONNECTION
Check the rating plate on the washer. Make sure that the supply phase and voltage match the rating of the washer. Some locations
require an autonomous power switch (I) at the current input, with a minimum of 0.12" (3 mm) between contacts. Fit a 300 mA, type
A, immediate response differential protection. Check your local regulations.
Insert the exible armored cable or exible conduit through the hole in the rear panel. Secure the armored cable or conduit to the
rear panel. Connect the wiring per the correct illustration.
PE
PE
L1
L1
L2
Single Phase
L3
L2
Three Phase
Loading ...
Loading ...
Loading ...