Binder UF V 700 UF V 500-liter Ultra Low Temperature Freezer

User Manual - Page 38

For UF V 700.

PDF File Manual, 119 pages, Read Online | Download pdf file

UF V 700 photo
Loading ...
Loading ...
Loading ...
UF V (E3) 10/2020 Page 38/119
4.5 Electrical connection
The ULTRA.Guard™ ultra-low temperature freezers UF V are supplied ready for connection and come with
an IEC connector plug.
An internal overload release protects the freezer against excess-current.
Model
Plug of the power
cable
Nominal voltage +/-
10% at the
indicated power frequency
Current
type
Fuse
UF V Grounded plug 230 V at 50 Hz 1N~ 10 A
UF V UL
(120 V)
NEMA 5-20P 115 V at 60 Hz 1N~ 10 A
UF V UL
(208 V)
NEMA 6-20P 208-240 V at 60 Hz 2~ 10 A
The domestic socket must also provide a protective conductor. Make sure that the connection of the
protective conductor of the domestic installations to the chambers protective conductor meets the latest
technology. The protective conductors of the socket and plug must be compatible!
DANGER
Electrical hazard due to missing protective conductor connection.
Deadly electric shock
Make sure that the chamber’s power plug and the power socket match and se-
curely connect the electrical protective conductors of the chamber and the house
installation.
Only use original connection cables from BINDER.
Prior to connection and start-up, check the power supply voltage. Compare the values to the specified
data located on the chambers type plate (located on the left-hand side of the chamber, bottom right-
hand, chap. 1.6).
NOTICE
Danger of incorrect power supply voltage due to improper connection.
Damage to the chamber.
Check the power supply voltage before connection and start-up.
Compare the power supply voltage with the data indicated on the type plate.
Observe a sufficient current protection according to the number of freezers that you want to operate.
We recommend the use of a residual current circuit breaker.
When connecting, please observe the regulations specified by the local electricity supply company and
as well as the VDE directives (for Germany)
Pollution degree (acc. to IEC 61010-1): 2
Over-voltage category (acc. to IEC 61010-1): II
See also electrical data (chap. 27.3).
To completely separate the chamber from the power supply, you must disconnect the power
plug. Install the chamber in a way that the power plug is easily accessible and can be easily
pulled in case of danger.
4.6 Advanced voltage booster (option)
With this option, a buck/boost converter automatically compensates for voltage fluctuation.
Loading ...
Loading ...
Loading ...