Loading ...
Loading ...
Loading ...
UF V (E3) 10/2020 Page 100/119
26. Disposal
26.1 Disposal of the transport packing
Packing element
Material
Disposal
Straps to fix packing on pallet
Plastic
Plastic recycling
Wooden transport box (option)
with metal screws
Non-wood (compressed match-
wood, IPPC standard)
Wood recycling
Metal
Metal recycling
Pallet
with foamed plastic stuffing
Solid wood (IPPC standard)
Wood recycling
PE foam
Plastic recycling
Transport box
with metal clamps
Cardboard
Paper recycling
Metal
Metal recycling
Top cover
with foamed plastic stuffing
Cardboard
Paper recycling
PE foam
Plastic recycling
Bag for operating manual
PE foil
Plastic recycling
Insulating air cushion foil (packing
of optional accessories)
PE foil Plastic recycling
If recycling is not possible, all packing parts can also be disposed of with normal waste.
26.2 Decommissioning
• Turn off the chamber with the main power switch (4) and disconnect it from the power supply (pull the
power plug).
• Let the chamber defrost (chap. 25.2.3).
• Temporal decommissioning: See indications for appropriate storage, chap. 3.3.
• Final decommissioning: Dispose of the chamber as described in chap. 26.3 to 26.5.
When restarting the chamber, please pay attention to the corresponding information in chap. 6.2.
26.3 Disposal of the chamber in the Federal Republic of Germany
According to Annex I of Directive 2012/19/EU of the European Parliament and of the Council on waste
electrical and electronic equipment (WEEE), BINDER devices are classified as “monitoring and control
instruments” (category 9) only intended for professional use”. They must not be disposed of at public col-
lecting points.
The chambers bear the symbol for the marking of electrical and electronic equipment manu-
factured / placed on the market in the EU after 13 August 2005 and be disposed of in separate
collection according to Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE) and German national law for electrical and electronic equipment (Elektro- und El-
ektronikgerätegesetz, ElektroG). WEEE marking: crossed-out wheeled bin with solid bar un-
der. A significant part of the materials must be recycled in order to protect the environment.
At the end of the device’s service life, have the chamber disposed of according to the German national law
for electrical and electronic equipment (Elektro- und Elektronikgerätegesetz, ElektroG from 20 October
2015, BGBl. I p. 1739) or contact BINDER service who will organize taking back and disposal of the cham-
ber according to the German national law for electrical and electronic equipment (Elektro- und El-
ektronikgerätegesetz, ElektroG from 20 October 2015, BGBl. I p. 1739).
Loading ...
Loading ...
Loading ...