Loading ...
Loading ...
Loading ...
UF V (E3) 10/2020 Page 103/119
26.5 Disposal of the chamber in non-member states of the EU
NOTICE
Danger of violation against existing law if not disposed of properly.
Alteration of the environment.
For final decommissioning and disposal of the chamber, please contact BINDER Ser-
vice.
Follow the statutory regulations for appropriate, environmentally friendly disposal.
Chamber with option “battery-buffered alarm system”: The chamber is equipped with a rechargeable battery
(12 V, 7.2 Ah) which can be recycled. At the end of its useful life, please dispose of it according to national
regulations.
The refrigerants used R290 (propane, GWP 3) and R170 (ethane, GWP 6) are inflammable at ambient
pressure. A suction is not required. Ensure the compliance with the applicable legal requirements regarding
qualification of staff, and documentation.
27. Technical description
27.1 Factory calibration and adjustment
The chambers were calibrated and adjusted in factory. Calibration and adjustment were performed using
standardized test instructions, according to the QM DIN EN ISO 9001 system applied by BINDER (certified
since December 1996 by TÜV CERT). All test equipment used is subject to the administration of measure-
ment and test equipment that is also a constituent part of the BINDER QM DIN EN ISO 9001 systems. They
are controlled and calibrated to a DKD-Standard at regular intervals.
Repeated calibrations are recommended in periods of 12 months.
27.2 Over current protection
The devices are equipped with an internal fuse not accessible from outside. If this fuse is blown, please
inform an electronic engineer or BINDER service.
27.3 Technical data
Chamber size
500
700
Exterior dimensions
Width, gross (including hinges, door lock and controller
housing)
mm / inch 920 / 36.2 1204 / 47.4
Height, gross (incl. castors)
mm / inch
1966 / 77.4
1966 / 77.4
Depth, gross (including power connection, without door
lock and controller housing (equals depth when door
open))
mm / inch 850 / 33.5 850 / 33.5
Depth, gross (including power connection, door lock and
controller housing)
mm / inch 1005 / 39.6 1005 / 39.6
Wall clearance rear (minimum)
mm / inch
100 / 3.9
100 / 3.9
Wall clearance side (side without hinges) (minimum)
mm / inch
100 / 3.9
100 / 3.9
Wall clearance side (side with hinges) (minimum)
mm / inch
245 / 9.6
245 / 9.6
Doors
Number of chamber doors
1
1
Number of compartment doors
2
2
Loading ...
Loading ...
Loading ...