Loading ...
Loading ...
Loading ...
58
Below is a description of the features listed in this menu.
Anti-Disturb Enable: These radio buttons allow the user to enable or disable anti-disturb. Anti-disturb is used to
filter shaking leaves, water ripples, or any other disturbance that could affect IVS reporting.
Sensitivity: This slider is used to adjust the sensitivity of the calibration settings used for IVS reporting.
Add Calibration: Allows the user to create a detection area in which IVS rules will be calibrated.
Remove Calibration: Clears the set detection area from the live monitoring screen.
Ruler: These radio buttons allow the user to set either vertical or horizontal rulers on the live monitoring screen.
Note: You can add a total of 3 vertical rulers and 1 horizontal ruler. A horizontal ruler must be used to
properly calibrate.
Actual Length: Represents the actual length of the ruler on the live monitoring screen in meters.
Add Rulers: This option allows the user to add and adjust a ruler on the live monitoring screen. Rulers are used to
adjust calibration for IVS rules. Use you mouse to draw rulers on the live monitoring screen.
Remove Rulers: Removes rulers set in the detection area menu. To remove a ruler, select the ruler from the
detection area menu and click Remove Rulers.
Weight Verification: Used to test the width calibration accuracy in meters of a set ruler. A horizontal ruler must be
set, and the detection area must be saved first to use this feature.
Height Verification: Used to test the height calibration accuracy in meters of a set ruler. A horizontal ruler must be
set, and the detection area must be saved first to use this feature.
Calibration Validation: Used to draw the calibration test line on the live monitoring screen.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
Loading ...
Loading ...
Loading ...