Loading ...
Loading ...
Loading ...
Auto HDR: Exposure Diff. 1.0EV ― Auto HDR: Exposure Diff. 6.0EV:
Sets the exposure difference, based on the contrast of the subject. Select the optimization level
from 1.0EV (weak) to 6.0EV (strong).
For example, if you set the exposure value to 2.0 EV, three images will be composed with the
following exposure levels: -1.0 EV, correct exposure and +1.0 EV.
Hint
The shutter is released three times for one shot. Be careful about the following:
Use this function when the subject is motionless or does not flash light.
Do not change the composition before shooting.
Note
This function is not available when the [ Quality] is [RAW] or [RAW & JPEG].
[Auto HDR] is not available in the following shooting modes:
[Intelligent Auto]
[Superior Auto]
[Sweep Panorama]
[Scene Selection]
[Auto HDR] is not available in the following situations:
When [Multi Frame NR] is selected.
When [Picture Effect] is set to other than [Off].
When [Picture Profile] is set to other than [Off].
You cannot start the next shot until the capture process is completed after you shoot.
You may not obtain the desired effect depending on the luminance difference of a subject and the
shooting conditions.
When the flash is used, this function has little effect.
When the contrast of the scene is low or when product shake or subject blur occurs, you may not
obtain good HDR images.
will be displayed over the recorded image to inform you when
the camera detects image blurring. Change the composition or re-shoot the image carefully to avoid
image blur, as needed.
[104] Shooting Selecting the ISO sensitivity
ISO
Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger
the number, the higher the sensitivity.
ISO (ISO) on the control wheel → select desired setting.
1
Loading ...
Loading ...
Loading ...