Loading ...
Loading ...
Loading ...
206
❚❚ Canceling Bracketing
To cancel bracketing, press the D button and rotate the main
command dial until the number of shots in the bracketing
sequence is zero (0F/r) and the exposure/flash bracketing
indicators are no longer displayed. The program last in effect will
be restored the next time bracketing is activated. Bracketing can
also be cancelled by performing a two-button reset (0 199),
although in this case the bracketing program will not be
restored the next time bracketing is activated.
A Exposure and Flash Bracketing
In continuous release modes (0 103), shooting will pause after the
number of shots specified in the bracketing program have been taken.
Shooting will resume the next time the shutter-release button is
pressed.
In self-timer mode, the camera will take the number of shots
selected in Step 2 on page 203 each time the shutter-release button is
pressed, regardless of the option selected for Custom Setting c3 (Self-
timer) > Number of shots (0 337); the interval between shots is
however controlled by Custom Setting c3 (Self-timer) > Interval
between shots.
In other modes, one shot will be taken each time the
shutter-release button is pressed.
If the memory card fills before all shots in the sequence have been
taken, shooting can be resumed from the next shot in the sequence
after the memory card has been replaced or shots have been deleted
to make room on the memory card.
If the camera is turned off before
all shots in the sequence have been taken, bracketing will resume from
the next shot in the sequence when the camera is turned on.
Loading ...
Loading ...
Loading ...