Loading ...
Loading ...
Loading ...
158
6 Check the results.
If the camera was able to measure
a value for white balance, C
will flash in the control panel for
about six seconds, while the
viewfinder will show a flashing a.
If lighting is too dark or too bright,
the camera may be unable to
measure white balance.
A flashing
ba will appear in the control
panel and viewfinder for about six
seconds.
Press the shutter-release
button halfway to return to Step 5
and measure white balance again.
D Direct Measurement Mode
If no operations are performed during viewfinder photography while
the displays are flashing, direct measurement mode will end in the
time selected for Custom Setting c2 (Standby timer, 0 336).
A Selecting a Preset
Selecting Preset manual for the White
balance option in either of the shooting
menus displays the dialog shown at right;
highlight a preset and press J.
If no value
currently exists for the selected preset, white
balance will be set to 5200 K, the same as
Direct sunlight.
Control panel
Viewfinder
Control panel
Viewfinder
Loading ...
Loading ...
Loading ...