Loading ...
Loading ...
Loading ...
WASHER DRAIN SYSTEM
Check location where washer will
be installed.
Make sure the washer lid is closed
when moving the washing machine.
Do not store or operate washer at or
below 32°F (0°C) (some water may
remain in washer). See page 32 for
Winterizing Information.
Proper installation is your responsibility.
Make sure you have everything neces-
sary for correct installation including the
following points:
Grounded receptacle: Must
be within 5 ft (1.5 m) of where
the power cord is attached to
the back of the washer.
S
/
J
Hot and cold water faucets:
Must provide water pressure
between 5-!00 psi and be
within 31/2ft (1.1 m) of the hot
and cold water fill valves
attached to the back of the
washer.
Washer must
be level ..........
(see pp. 15 .................
and 19).
p
/
J
Support: Floor must be sturdy
enough to support a total weight
of 260 Ib (118 kg) (including
washer, water and load weight).
27"
(68.6 cm)
Laundry drain system:
The washer must drain into a
or laundry tub with a
carry-away capacity of 7 gal
(26.6 L) per minute. The top of
the tub must be at least 27 in
(68.6 cm) above floor and no
higher than 48 in (121.9 cm)
from bottom of washer.
Level floor: Maximum
allowable slope under entire
washer - 3/8in (0.95 cm).
Loading ...
Loading ...
Loading ...