Loading ...
Loading ...
Loading ...
LEVEL WASHER REVIEW INSTALLATION
Leveling your washer properly pre-
vents excessive noise and vibration.
STEP 1. Check levelness of the washer
by placing a level on top of the washer,
first side-to-side; then front-to-back.
STEP 2. If washer is not level, prop up
the front or back of the washer and
adjust the legs up or down. Make final
check with level. All four feet must touch
the floor so that washer is stable.
Take a few minutes to complete
this checklist. It will help assure you
that you have a proper installation
and increase your satisfaction with
your Kenmore washer.
[] Check electrical requirements.
Be sure you have correct electrical
supply and recommended grounding
method.
[] Check that you have:
• All the tools you started with.
• Removed all shipping and packaging i'
materials.
• Installed all parts listed on page 14.
[] Check that: ....................
• Washer is level.
• Water faucets are turned on.
FINAL STEPS
[] Plug into a grounded 3 prong outlet.
[] Take a few minutes and read the
"OPERATING YOUR WASHER"
section to fully understand your new
washer. Then, start the washer and
allow it to complete the REGULAR
Cycle.
19
Loading ...
Loading ...
Loading ...