Loading ...
Loading ...
Loading ...
CONNECT INLET HOSES
TO WATER FAUCETS
STEP 1. Make sure washer basket is
empty. Run water through both faucets
into a bucket or laundry tub to get rid
of particles in the water lines that might
clog hoses. Determine which faucet is
hot and which is cold. Mark the hot
water faucet.
STEP 2. Attach the hose (from the inlet
marked "H") to the hot water faucet.
Screw on coupling to faucet by hand.
Make an additional two-thirds turn with
pliers to tighten coupling. DO NOT
OVERTIGHTEN; this could damage
the coupling.
STEP 3. Attach the hose (from the inlet
marked "C") to the cold water faucet.
Screw on coupling to faucet by hand.
Make an additional two-thirds turn with
pliers to tighten coupling. DO NOT
OVERTIGHTEN; this could damage
the coupling.
STEP 4. Turn on water faucets and
check for leaks. A small amount of
water will enter the washer. You will
drain this later.
SECURE DRAIN HOSE
Securing the drain hose properly will
protect your floors from damage due
to water leakage.
STEP 1. Move washer to its final location.
STEP 2. Tightly wrap the plastic strap
around the drain hose and laundry tub
or standpipe.
STEP 3. Push plug through the hole to
secure the plastic strap.
i ;]
{ i..il "..
If the water faucets and drain standpipe
are recessed, put hooked end of drain
hose in standpipe. Tightly wrap the
plastic strap around the drain hose and
water inlet hoses (not the handles or
stems). Push plug through the hole to
secure the plastic strap.
I8
Loading ...
Loading ...
Loading ...