Loading ...
Loading ...
Loading ...
REMOVE SHIPPING MATERIAL
AND ADJUST LEVELING LEGS
Excessive Weight Hazard
Use two or more people to move
and install washer.
Failure to do so can result in back
or other injury.
STEP 1. Place two corner posts from
the carton on the floor in back of the
washer.
STEP 2. Firmly grasp the body of the
washer and gently lay it on its back
on the corner posts. Remove shipping
pieces.
STEP 3. Remove cardboard and plastic
foam packaging from under washer and
from washer basket.
BOTTOMVIEW
STEP 5. Use an adjustable wrench to
finish turning the legs until you reach
the diamond marking. This is the
recommended initial setting. Later
adjustment may be needed.
STEP 6. Now stand the washer up.
Slide washer onto cardboard and move it
close to its final location. Leave enough
room to connect the water inlet hoses
and drain hose.
iiiiiiiiiiiiiii_i_
\
TOP VIEW
STEP 4. Remove parts and parts bag
from washer basket.
15
Loading ...
Loading ...
Loading ...